【Package】5 pcs/Pack
【Usage】Tooth preparation , crown-cutting , pulp opening and restoration trimming .
【Product Features】Cross bidirectional tooth with interlaced left and right spirals , featuring sharp cutting performance and stable chip holding capacity .
【Recommended Speed】120000-3000000/rpm
Product Info
Applications
Tooth preparation , crown-cutting , pulp opening and restoration trimming .
Features
Cross bidirectional tooth with interlaced left and right spirals , featuring sharp cutting performance and stable chip holding capacity .
Instructions for Use
1. Mount the bur onto a qualified dental handpiece before each use , verify that the bur is firmly clamped and rotates smoothly without abnormalities , then active the dental handpiece .
2. Before operation , perform a running test outside the patient’s oral cavity , immediately discontinue use if any abnormalities such as looseness or wobbling are detected .
3.Do not apply excessive pressure during use , recommended optimal rotational speed :120000-3000000/rpm
Disinfection method
Sterilize by steam under pressure before use (sterilization temperature 121℃ , minimum sterilization time 20min , recommended pressure range :102.8kPa～122.29kPa)
Precautions
1. Storage and transportation shall be carried out in a clean environment at normal temperature and atmospheric pressure with humidity below 90% , which is dry , stable( free from dropping and collision ),and away from harmful chemicals and gases such as acids and alkalis .
2. The production shall be transported in its original factory packaging , placed as indicated markings on the package during transit , and shall not be squeezed by heavy objects .
