[Package] 5 pcs/Pack
[Usage] Deburr and contour the margins of resin restorations , temporary crowns and ceramic restorations .
[Product Features] Equipped with cross-cut edges for trimming flat cavity floors . Ordinary burs without cross-cut edges can only grind laterally and cannot cut vertically downward .
[Recommended Speed] 120000-3000000/rpm
Product Info
Applications
Deburr and contour the margins of resin restorations , temporary crowns and ceramic restorations .
Features
Equipped with cross-cut edges for trimming flat cavity floors . Ordinary burs without cross-cut edges can only grind laterally and cannot cut vertically downward .
Instructions for Use
1. Mount the bur onto a qualified dental handpiece before each use , verify that the bur is firmly clamped and rotates smoothly without abnormalities , then active the dental handpiece .
2. Before operation , perform a running test outside the patient’s oral cavity , immediately discontinue use if any abnormalities such as looseness or wobbling are detected .
3.Do not apply excessive pressure during use , recommended optimal rotational speed :120000-3000000/rpm
Disinfection method
Sterilize by steam under pressure before use (sterilization temperature 121℃ , minimum sterilization time 20min , recommended pressure range :102.8kPa～122.29kPa)
Precautions
1. Storage and transportation shall be carried out in a clean environment at normal temperature and atmospheric pressure with humidity below 90% , which is dry , stable( free from dropping and collision ),and away from harmful chemicals and gases such as acids and alkalis .
2. The production shall be transported in its original factory packaging , placed as indicated markings on the package during transit , and shall not be squeezed by heavy objects .
