【Package】5 pcs /Pack
【Usage】 Primarily used for trimming cavity walls , finishing pulp chambers , widening cavities and rounding line angles .
【Product Features】The entire working head tapers slightly from thick base to tip . straight fluted cutting edges are arranged on lateral sides , flat tip with minimal taper .
【Recommended Speed】500-30000/rpm
Product Info
Applications
Primarily used for trimming cavity walls , finishing pulp chambers , widening cavities and rounding line angles .
Features
The entire working head tapers slightly from thick base to tip . straight fluted cutting edges are arranged on lateral sides , flat tip with minimal taper .
Instructions for Use
1. Mount the bur onto a qualified dental handpiece before each use , verify that the bur is firmly clamped and rotates smoothly without abnormalities , then active the dental handpiece .
2. Before operation , perform a running test outside the patient’s oral cavity , immediately discontinue use if any abnormalities such as looseness or wobbling are detected .
3.Do not apply excessive pressure during use , recommended optimal rotational speed :500-30000/rpm
Disinfection method
Pressure steam sterilization shall be performed prior to use (set sterilization temperature: 121°C; minimum sterilization duration: 20 min; reference pressure range: 102.8 kPa ~ 122.29 kPa).
Precautions
1. Storage and transportation shall be carried out in a clean environment at normal temperature and atmospheric pressure with humidity below 90%, which is dry, stable (free from dropping and collision), and away from harmful chemicals and gases such as acids and alkalis.
2. The product shall be transported in its original factory packaging. Place the package as indicated by the marks on the packaging during transportation and avoid heavy object extrusion.
