【Package】5 pcs /Pack
【Usage】The cross-cut edges at the tip enable direct downward drilling and cutting into tooth tissue, for cavity opening and deepening preparation .
【Product Features】Equipped with cross-cut edges for vertical drilling and lateral cutting . the cylindrical blade shapes straight cavity walls and creates parallel cavities . Delivers high torque under low speed with stable operation , eliminating vibration during tooth preparation .
【Recommended Speed】500-30000/rpm
Product Info
Applications
The cross-cut edges at the tip enable direct downward drilling and cutting into tooth tissue, for cavity opening and deepening preparation .
Features
Equipped with cross-cut edges for vertical drilling and lateral cutting . the cylindrical blade shapes straight cavity walls and creates parallel cavities . Delivers high torque under low speed with stable operation , eliminating vibration during tooth preparation .
Instructions for Use
1. Mount the bur onto a qualified dental handpiece before each use , verify that the bur is firmly clamped and rotates smoothly without abnormalities , then active the dental handpiece .
2. Before operation , perform a running test outside the patient’s oral cavity , immediately discontinue use if any abnormalities such as looseness or wobbling are detected .
3.Do not apply excessive pressure during use , recommended optimal rotational speed :500-30000/rpm
Disinfection method
Pressure steam sterilization shall be performed prior to use (set sterilization temperature: 121°C; minimum sterilization duration: 20 min; reference pressure range: 102.8 kPa ~ 122.29 kPa).
Precautions
1. Storage and transportation shall be carried out in a clean environment at normal temperature and atmospheric pressure with humidity below 90%, which is dry, stable (free from dropping and collision), and away from harmful chemicals and gases such as acids and alkalis.
2. The product shall be transported in its original factory packaging. Place the package as indicated by the marks on the packaging during transportation and avoid heavy object extrusion.
