【Package】5 pcs /Pack
【Usage】Grinding of dentures , trimming bevels , gaps , proximal surfaces and shoulders of dentures , carving and finishing wax patterns.
【Product Features】The cutting head is provided with longitudinal grooves to form multi-blade cutting , featuring excellent chip evacuation and low cutting resistance .
【Recommended Speed】6000-50000/rpm
Product Info
Applications
Grinding of dentures , trimming bevels , gaps , proximal surfaces and shoulders of dentures , carving and finishing wax patterns .
Features
The cutting head is provided with longitudinal grooves to form multi-blade cutting , featuring excellent chip evacuation and low cutting resistance .
Instructions for Use
1.Mount the bur on compatible qualified equipment each time before use , confirm the bur is securely clamped , rotates smoothly and free of abnormalities before starting the equipment .
2.Perform a pre-operation rotation test prior to work , immediately discontinue use if any abnormalities such as looseness or wobbling are detected .
3.Do not apply excessive pressure during operation , recommended optimal rotational speed : 6000-50000/rpm .
Precautions
1. After use , blow away wax debris , resin residues and metal powder from the flutes with an air gun .
2. Store separately by category to prevent chipping of cutting edges caused by collision and impact .
3. For storage and transportation , place the product in a clean environment at normal temperature and atmospheric pressure with humidity below 90% . the environment shall be dry , stable (free of dropping and collision), and kept away from hazardous chemicals and gases such as acids and alkalis .
4. The product shall be transported in its original factory packaging , place the package as marked on the label during transit , and avoid heavy weight extrusion .
