[Packaging Specification] 1 piece per pack
[Application] Crown & bridge fabrication, model casting, model fabrication, acrylic resin processing
[Product Features] Excellent chip evacuation, low clogging risk, stable cutting and low vibration
[Recommended Rotation Speed] D ≤ 2.3 mm: 25,000–40,000 rpm D ＞ 2.5 mm: 20,000–35,000 rpm D ≥ 5.0 mm: 15,000–30,000 rpm
Product Info
Applications
Crown & Bridge Technology, Model Casting Technology, Model Fabrication, Acrylic Resin Technology.
Features
Excellent chip evacuation, anti-clogging design, stable cutting operation and low vibration.
Instructions for Use
1. Fit the grinding head onto compliant equipment before each use. Ensure the grinding head is firmly clamped, rotates smoothly and without abnormalities before starting the equipment.
2. Carry out a trial run inspection prior to operation. Cease use immediately if looseness, wobbling or other abnormal conditions are found.
3. Do not apply excessive pressure during operation. Recommended optimal rotational speeds: (1) D ≤ 2.3 mm: 25,000–40,000 rpm (2) D ＞ 2.5 mm: 20,000–35,000 rpm (3) D ≥ 5.0 mm: 15,000–30,000 rpm
Precautions
1. After use, blow away powder debris inside the grooves with an air gun.
2. Store separately by category to prevent collision and chipping of cutting edges.
3. Storage and transportation shall be conducted in a clean environment with normal temperature and atmospheric pressure, humidity below 90%, dry and shockproof (no dropping or collision), and kept away from harmful chemicals and gases such as acids and alkalis.
4. The product must be transported in its original factory packaging. Place packages as marked on the outer packaging during transit and avoid extrusion by heavy loads.
