【Package】1 pc/ pack
【Usage】Crown and bridge technology , model casting , model fabrication , acrylic resin technology .
【Product Features】Low vibration and stable cutting performance , free of edge gouging and corner chipping .
【Recommended Speed】D≤2.3mm 30000rpm D＞2.5mm 20000-35000rpm D＝6.0mm 15000-30000rpm
Product Info
Applications
Crown and bridge technology , model casting , model fabrication , acrylic resin technology .
Features
Low vibration and stable cutting performance , free of edge gouging and corner chipping .
Instructions for Use
1. Mount the carbide cutter on compatible, qualified equipment each time before use. Confirm that the carbide cutter is securely clamped, rotates smoothly, and is free of abnormalities before starting the equipment.
2. Perform a pre-operation rotation test prior to work , immediately discontinue use if any abnormalities such as looseness or wobbling are detected .
3. Do not apply excessive pressure during operation , recommended optimal rotational speed :D≤2.3mm 30000rpm D＞2.5mm 20000-35000rpm
Precautions
1. After use , blow all dust and debris out of the flutes with an air gun
2. Store separately by category to prevent chipping of cutting edges caused by collision and impact .
3. For storage and transportation , place the product in a clean environment at normal temperature and atmospheric pressure with humidity below 90% . the environment shall be dry , stable (free of dropping and collision), and kept away from hazardous chemicals and gases such as acids and alkalis .
4. The product shall be transported in its original factory packaging , place the package as marked on the label during transit , and avoid heavy weight extrusion .
