【Package】1 pc/ pack
【Usage】 Crown and bridge technology , model casting technology , model fabrication , acrylic
【Product Features】Low cutting resistance , fast stock removal and high rough grinding efficiency .
【Recommended Speed】15000-25000rpm
Product Info
Applications
Crown and bridge technology , model casting technology , model fabrication , acrylic
Features
Low cutting resistance , fast stock removal and high rough grinding efficiency .
Instructions for Use
1. Mount the carbide cutter on compatible, qualified equipment each time before use. Confirm that the carbide cutter is securely clamped, rotates smoothly, and is free of abnormalities before starting the equipment.
2. Perform a pre-operation rotation test prior to work , immediately discontinue use if any abnormalities such as looseness or wobbling are detected .
3. Do not apply excessive pressure during operation , recommended optimal rotational speed :15000-25000rpm.
Precautions
1. After use , blow all dust and debris out of the flutes with an air gun
2. Store separately by category to prevent chipping of cutting edges caused by collision and impact .
3. For storage and transportation , place the product in a clean environment at normal temperature and atmospheric pressure with humidity below 90% . the environment shall be dry , stable (free of dropping and collision), and kept away from hazardous chemicals and gases such as acids and alkalis .
4. The product shall be transported in its original factory packaging , place the package as marked on the label during transit , and avoid heavy weight extrusion .
